3 Tips change Remote Desktop for Windows 10

Tips change Remote Desktop for Windows 10 – In Windows 10, Remote Desktop is a feature that allows you to access your computer remotely using Remote Desktop Protocol (RDP) to provide assistance to other users or to manage the computer or server without a present on site.

Tips change Remote Desktop for Windows 10

Enabling enable remote connections in Windows 10 computer allows you to remotely control your PC in another computer if necessary. Thus, this article illustrates how to have it turned on in three tips.

Tip 1: Using Settings

Use these steps to enable Remote Desktop on Windows 10 using the Settings application.

Step 1: Open PC Settings Windows 10.

Step 2: Click on System.

Step 3: Click on the Remote Desktop.

Step 4: Turn on Enable Remote Desktop toggle switch.

Step 5: Click the Confirm button.


Once you have completed the steps, you can connect to your computer using the Remote Desktop application modern (recommended) or use the Remote Desktop Connection built-in experience is included with Windows 10.

You will also notice that when you enable Remote Desktop, two additional options are also enabled (Keep PC me awake for a connection when installed and Make My PC found on the private network to enable automatic connection of remote devices) to ensure that you can always connect when you far.

In the “Advanced settings”, you will also find additional options, such as the ability to ask the computer to use the Network Level Authentication to connect. This is a feature that makes the connection more secure by requiring users to authenticate with the network before they can connect to the device.

Settings page also displays the current Remote Desktop port in case you need to configure the router to allow remote connections outside the network. If nothing changes on your device, the port number must always be 3389.

Tip 2: Using Control panel

Step 1: Open Control panel Windows 10.

Step 2: Click on System and Security.

Step 3: Under the “System”, click the Allow remote access.

Step 4: Under the “Remote Desktop”, select Allow remote connections to this computer option.

Step 5: Click the OK button.

It should be noted that when you enable the feature using the Control Panel, the option to request the Network Level Authentication will also be selected by default, which is an option you want to have enabled anyway.

Although you can use Control Panel to configure Remote Desktop on Windows 10 and earlier versions, such as Windows 8.1 and Windows 7, the ability to activate the feature using the Settings app is only available starting with Windows 10 Fall creators Update and later versions.

Tip 3: Using Command Prompt

Use these steps to enable the remote desktop protocol with Command Prompt:

Step 1: Open the Start.

Step 2: Search for Command Prompt, right-click the top result, and select Run as administrator option.

Step 3: Type the following command to enable remote desktop protocol and press Enter:

reg add "HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlTerminal Server" /v fDenyTSConnections /t REG_DWORD /d 0 /f

Step 4: (Optional) Type the following command to enable remote desktop through Windows Firewall and press Enter:

netsh advfirewall firewall set rule group="remote desktop" new enable=Yes

Step 5: Once you have completed these steps, the protocol will allow, and you’ll be able to access the device remotely.

Okey! it is done? You have other ways to share by commenting below! Thanks you!

Leave a Reply

Your email address will not be published. Required fields are marked *